OXVA NEXLIM GO POD VAPE KIT

OXVA NeXlim Go Pod Kit

The OXVA NeXlim Go strips things back compared to the original NeXlim. No screen, no wattage buttons.

An 1800mAh battery, a toggle switch for eco or boost mode, and auto-draw activation. The kit sets its own wattage based on which pod you've got in, so there's nothing to adjust.

The NeXlim Go vape uses the same NeXlim pods with Unitech 2.0 dual mesh coils. Three resistances to choose from: 0.6Ω, 0.8Ω, and 1.2Ω covering RDL and MTL draws.

Works with nic salts and 50/50 e-liquids. Eight colour options and a 2ml TPD pod. These pods are refillable, not prefilled, so you bring your own juice.

The NeXlim Go fits in the OXVA standalone range alongside the Nexlim and VPrime in the OXVA standalone pod kit range. For the newer dual-mesh model, see the OXVA NeXlim 2. Replacement pods are stocked across the OXVA pods range.

Key Features

• 1800mAh Battery all day vaping, USB-C charging
• Eco and Boost Modes flick the toggle switch to change output
• Auto-Draw inhale to fire, no buttons
• Unitech 2.0 Dual Mesh same coil tech as the original NeXlim
• Adjustable Airflow tighten for MTL, open up for RDL
• NeXlim Pod Compatible 0.6Ω, 0.8Ω, 1.2Ω
• LED Battery Indicator green, blue, red
• 8 Colours including silky, textured, and solid finishes

1800mAh Battery with Eco and Boost Modes

1800mAh is plenty for a pod kit. You'll get through a full day on eco mode without thinking about it.

Flip the toggle to boost and you'll burn through juice and battery a bit faster, but the hit's noticeably stronger. The switch is on the side, dead easy to find.

Charges over USB-C. The LED on the front tells you roughly where you're at: green means you're fine, blue means it's getting there, red means plug it in.

Adjustable Airflow

There's an airflow ring at the base of the NeXlim Go. Twist it shut for a tighter MTL draw with nic salts, or open it up for a looser RDL inhale on 50/50 juice. The airflow works with all three pod resistances.

NeXlim Go Pod Compatibility

The OXVA NeXlim Go uses the same NeXlim pods as the original NeXlim. Any NeXlim Go pods you already own click straight in, and the kit comes with one pre-installed, ready to fill.

The 0.8Ω is the most popular pick for nic salts at 10mg or 20mg. All pods have Unitech 2.0 dual mesh coils sealed in. For a full breakdown on the different resistances, check our guide to the OXVA NeXlim.

OXVA NeXlim Go Colours

The NeXlim Go comes in eight finishes across silky, textured and solid groups, with Silky Black and Black Warrior the popular picks. Each shade is below.

OXVA NeXlim Go Specifications

How to Use the OXVA NeXlim Go

1. Fill the pod with E-liquid through the side fill port and leave it for two minutes.
2. Slot the pod into the kit. Magnets pull it into place.
3. Flick the toggle to eco or boost.
4. Inhale to fire. No button.
5. Twist the airflow ring at the base to tune the draw.
6. Charge over USB-C when the LED turns red.

NeXlim Go instructions are simple by design. If the kit isn't firing, check the pod is clicked fully in and the battery has charge.

What's in the Box?

• 1 x OXVA NeXlim Go Kit
• 1 x NeXlim Pod (0.8Ω pre-installed)
• 1 x USB-C Cable
• 1 x User Manual